Botanists have realized that to plant seedlings or seeds is not the only way to have plants at your home or farm, as one can also relocate a plant form one location to another. The process of Growing Cycads is thus considered less appropriate than relocating them either for commercial or conservation purposes. Below is the process of relocating the plants.
Before the relocation, the first step involves removing the leaves at the bottom of a tree which are usually the older ones. This is done so as to reduce the effort required from the roots after moving to a new space to supply the many leaves with essential nutrients. The person relocating the plant will also need to note the directional orientation of the leaves and mark them to adjust position when moved.
The investor is required to measure the diameter of the tree caudex. The caudex refers to the tree branch or stem that stores water for future use. The diameter of the caudex is then used to dig out the tree. That is a circular channel of 3-4 times bigger diameter than that of the caudex is dug around the trees. The same 3-4 times bigger diameter is also used in digging downwards to remove the under roots.
If the holes are properly dug, then the process of removing the tree will be easier when pulling it. However, the investors need to be extra cautious when removing the tree so as to avoid damaging the roots as this may lengthen its recovery time. Additionally, the extra weight of plants due to soil on the roots is also removed by hosing.
On removing the roots and hosing off the extra soil, the person relocating the plant needs to check the condition of all roots for any extensive damage. During the check, they should also cut out the ragged roots attached to the root ball but are outside it. The roots are then treated with fungicide and rooting hormone so as to ensure they are not affected by pests or end up rotting.
Moving the tree will require using a machine and a vehicle. The plant can either be moved so as to be potted, boxed or relocated to a new location. For relocation, the mover needs to have found a good spot for the plant. For example, a cycad needs well drained soil often sandy in a sloppy area. While transportation, further root damage needs to be avoided.
The area is then prepared through digging a 1 and a half bigger hole diameter and deepness than that of the root ball. The plant is then put in place and covered with soil. The directional orientation of leaves should be observed as the tree is being set to reduce strain on it to adapt to the new location. The soil depth should also be noted as it should be similar to that on the plant while in the old location.
A trench is then dug around it on which 5 gallons of water mixed with rooting hormone is added to supply the plant for two to three weeks. The first leaves produced by the tree may be very different from those produced in the original location example color and size, however, with time the plant will adapt and become healthier.
Before the relocation, the first step involves removing the leaves at the bottom of a tree which are usually the older ones. This is done so as to reduce the effort required from the roots after moving to a new space to supply the many leaves with essential nutrients. The person relocating the plant will also need to note the directional orientation of the leaves and mark them to adjust position when moved.
The investor is required to measure the diameter of the tree caudex. The caudex refers to the tree branch or stem that stores water for future use. The diameter of the caudex is then used to dig out the tree. That is a circular channel of 3-4 times bigger diameter than that of the caudex is dug around the trees. The same 3-4 times bigger diameter is also used in digging downwards to remove the under roots.
If the holes are properly dug, then the process of removing the tree will be easier when pulling it. However, the investors need to be extra cautious when removing the tree so as to avoid damaging the roots as this may lengthen its recovery time. Additionally, the extra weight of plants due to soil on the roots is also removed by hosing.
On removing the roots and hosing off the extra soil, the person relocating the plant needs to check the condition of all roots for any extensive damage. During the check, they should also cut out the ragged roots attached to the root ball but are outside it. The roots are then treated with fungicide and rooting hormone so as to ensure they are not affected by pests or end up rotting.
Moving the tree will require using a machine and a vehicle. The plant can either be moved so as to be potted, boxed or relocated to a new location. For relocation, the mover needs to have found a good spot for the plant. For example, a cycad needs well drained soil often sandy in a sloppy area. While transportation, further root damage needs to be avoided.
The area is then prepared through digging a 1 and a half bigger hole diameter and deepness than that of the root ball. The plant is then put in place and covered with soil. The directional orientation of leaves should be observed as the tree is being set to reduce strain on it to adapt to the new location. The soil depth should also be noted as it should be similar to that on the plant while in the old location.
A trench is then dug around it on which 5 gallons of water mixed with rooting hormone is added to supply the plant for two to three weeks. The first leaves produced by the tree may be very different from those produced in the original location example color and size, however, with time the plant will adapt and become healthier.
About the Author:
When you are looking for information about growing cycads, go to our web pages online here today. More details are available at http://stores.botanicwonders.com/cycads now.
ليست هناك تعليقات:
إرسال تعليق