Most people take for granted the markings in the parking since many imagine it to be an easy process just like painting on other faces. On the contrary, marking parking spaces is an arduous task that takes a lot of time to plan in order to ensure safety of the people using them. A lot of planning is needed to make sure that the aesthetics of the establishment are enhanced and at the same time comply with federal and local laws governing the industry. When one needs Striping Houston offers the perfect location to visit.
Since the process of marking parking lots is complicated and involves a lot of steps than it is often thought, it is important to hire a professional. One must work with a company that has the right experience, equipment, technical expertise, and labor. The contractor must have a good understanding of the local and federal laws in order to ensure compliance.
The process of marking the space usually starts with surface preparation. It is important that the surface is prepared properly to ensure that the paint that is applied adheres properly to the surface. In case there is dirt on the surface, it will need to be removed using various methods. Using a high pressure washer can help in removing most kinds of dirt.
When the prepared surface is ready for paint application, the team should then begin to plan where and how the lines are applied. One might select to have the aisle designed such that it can allow for two-way or one-way traffic. The size of space and traffic flow in the location might determine if the design of the isle is two-way or one-way.
The plan must entail consideration of the safety of both drivers and pedestrians. In order to avoid collision, space in the parking lot should be sufficient. These spaces ought to be adequately broad so that drivers are able to move in and out with convenience. The length and width of spaces that cars are parked in are normally determined by federal and local standards.
There are various kinds of paints that can be used for this purpose. The kind of surface being painted usually determines the kind of paint to be used. New or sealed asphalt pavements usually do well with water-based paints. On the contrary, rubber-based paints do best on concrete pavements. There are several other kinds of surfaces and paints and one must research to ensure that they are using the right paints.
As the parking lot is used, the paint is removed with time since it is exposed to wear and tear. The parking lot that has many vehicles tends to wear out faster than those that have little traffic. Generally, the lot needs to be repainted in every two years. As a rule in the industry, the lot should be repainted once visibility falls by 25 percent.
The paint usually dry very fast. It may only take thirty minutes for the paint to be completely dry. However, as a precaution, the lot should not be open to use by vehicles until an hour has elapsed. This is because some spots may not have dried completely after thirty minutes.
Since the process of marking parking lots is complicated and involves a lot of steps than it is often thought, it is important to hire a professional. One must work with a company that has the right experience, equipment, technical expertise, and labor. The contractor must have a good understanding of the local and federal laws in order to ensure compliance.
The process of marking the space usually starts with surface preparation. It is important that the surface is prepared properly to ensure that the paint that is applied adheres properly to the surface. In case there is dirt on the surface, it will need to be removed using various methods. Using a high pressure washer can help in removing most kinds of dirt.
When the prepared surface is ready for paint application, the team should then begin to plan where and how the lines are applied. One might select to have the aisle designed such that it can allow for two-way or one-way traffic. The size of space and traffic flow in the location might determine if the design of the isle is two-way or one-way.
The plan must entail consideration of the safety of both drivers and pedestrians. In order to avoid collision, space in the parking lot should be sufficient. These spaces ought to be adequately broad so that drivers are able to move in and out with convenience. The length and width of spaces that cars are parked in are normally determined by federal and local standards.
There are various kinds of paints that can be used for this purpose. The kind of surface being painted usually determines the kind of paint to be used. New or sealed asphalt pavements usually do well with water-based paints. On the contrary, rubber-based paints do best on concrete pavements. There are several other kinds of surfaces and paints and one must research to ensure that they are using the right paints.
As the parking lot is used, the paint is removed with time since it is exposed to wear and tear. The parking lot that has many vehicles tends to wear out faster than those that have little traffic. Generally, the lot needs to be repainted in every two years. As a rule in the industry, the lot should be repainted once visibility falls by 25 percent.
The paint usually dry very fast. It may only take thirty minutes for the paint to be completely dry. However, as a precaution, the lot should not be open to use by vehicles until an hour has elapsed. This is because some spots may not have dried completely after thirty minutes.
About the Author:
You can find a detailed list of the advantages and benefits of using professional parking lot striping Houston services at http://www.semperstriping.com right now.
ليست هناك تعليقات:
إرسال تعليق