Tips For Commercial Concrete Staining Asheville NC

الجمعة، 26 أبريل 2019

By Joshua Sullivan


A worn out floor does not bring the aesthetic appeal that one intends to achieve in a commercial area. Therefore, it is wise to consider staining the concrete floor to maintain its beauty. There are some aspects that one should consider when considering such a project. Here are considerations for commercial concrete staining Asheville NC to think through.

Decide which kind of stain to use. One can decide between acid and water-based stain. The acid stain creates a rich and variegated earth tone while the water-based offer a variety of color choice. These types differ according to how one applies them. For instance, the acid stain would need additional time to react with the concrete compared with the water-based type. On the other hand, the water-based type would require additional surface preparation.

Repair any damages on the floor. Cracks and sunken holes can be a significant setback to a staining project. One should repair the cracks before handling this process. In that case, buy a pre-mixed compound and mix it with water. Use a trowel to fill the cracks and gaps and flatten the mixture on the top with the flat surface of the trowel. There are clear instructions provided on the pre-mixed concrete that one should consider.

Clean and polish the surface. Look for an electric sander which you can use to level the surface. Work on areas that have uneven textures, divots and have noticeable imperfection first before you go to other areas. Polish might be unnecessary for a new floor. After completing this process, vacuum the floor and wash it with soapy water to remove any remaining debris.

Determine whether to etch the surface or not. Etching provides a prior coat that helps the stain to infuse with the floor. Acquaint with the instructions provided on the etch label if you want to achieve the best results. Do not apply the etching product if the product you are about to use does not recommend its usage. Most etching products would require one to mix with warm water and one to use a stiff brush while scrubbing the floor.

Spread over the stain. It is imperative to make sure that your house has enough ventilation that will allow entry of fresh air into your rooms. Use water to mix the stain according to the instructions provided on its label. Consider using a pump other than a roller if you want this process to be effective. Start staining from the back of your room towards the entrance to complete this process effectively.

Acquaint with various safety measures needed in the project. There are a lot of health risks related to the staining process. Therefore, you must get the right gears to protect yourself from the harmful effect of these chemicals. One must have a gas mask, a protective suit, a head cover, boots, and gloves. Besides that, leave your rooms open for five to six hours after the staining process to remove odor from the rooms.

Select a reliable contractor. It is recommendable to get a contractor when handling a commercial project. Such professionals will guarantee the best outcome and take the least time possible more than you could do. Therefore, select someone who has worked for quite a long period and has established a remarkable reputation in the market as well.




About the Author:



ليست هناك تعليقات:

إرسال تعليق

 

Blogger news

Blogroll

Most Reading