People who go camping on a regular basis know the importance of having all the right equipment. Travel trailer stabilizer jacks are a very important piece that needs to be included before you go on your first trip. Most will come with them, but if not you need to purchase them. Make sure you get the type that is designed for your particular vehicle. They will keep things from moving around while you're living in it by providing a temporary foundation.
The reason for having these in place is to keep things still. Larger RVs have at least four wheels and are able to stay pretty stable on their own, though they also come with these devices. For two-wheeled trailers, having one at each of the four corners is absolutely necessary for the stabilization.
There are several types available. There are manual ones that use a hand crank to raise them to the base of the vehicle. The hydraulic ones are a bit easier to use and can be a bit stronger using the liquid pressure to keep them in place. There are also motorized versions that are really easy to use. These often are permanently attached to the four corners and hitting a single button lowers them into place. They need to be on all four corners in order to properly stabilize the vehicle.
Park on level ground. If you can't find perfectly level ground, get as close as possible. You can you the front hitch on two-wheeled vehicles to provide the leveling. The RV has a system installed to do this for you.
Chocks and blocks need to be used to prevent the vehicle from rolling. The chocks should be put in place and hammered in with a rubber mallet. One in front and behind a wheel should do the job. This keeps it from shifting as it is being raised. The stands need to be placed on blocks of wood. This will prevent them from sinking into the dirt at the campsite. Sinking will cause it to become unstable again, so be sure to have sturdy, thick blocks to place the stands on because they will be holding a lot of weight.
Install or lower the jacks. If they are removable, pull them out of storage and set one on each block of wood. Raise them, or lower them if they are attached to the RV until the vehicle is held in place. They should be nice and tight and pushing up pretty hard in order to keep things from moving around when you're inside the vehicle.
Reverse the process when you are breaking camp. You can damage the vehicle if you try to leave before removing or raising these. The trailer's front can't be lowered onto the tow hitch if these are in place. The blocks of wood need to be collected and store along with the wheel chocks. Before removing either of these, be sure the emergency brake is on so it will not move when you remove the chocks.
Safe camping includes using chocks, blocks and jack stands. They will keep the vehicle from moving and provide a stable environment for moving around. Since they are not built on a foundation like a house, this provides that foundation. They should be placed at all four corners in order to have the best effect.
The reason for having these in place is to keep things still. Larger RVs have at least four wheels and are able to stay pretty stable on their own, though they also come with these devices. For two-wheeled trailers, having one at each of the four corners is absolutely necessary for the stabilization.
There are several types available. There are manual ones that use a hand crank to raise them to the base of the vehicle. The hydraulic ones are a bit easier to use and can be a bit stronger using the liquid pressure to keep them in place. There are also motorized versions that are really easy to use. These often are permanently attached to the four corners and hitting a single button lowers them into place. They need to be on all four corners in order to properly stabilize the vehicle.
Park on level ground. If you can't find perfectly level ground, get as close as possible. You can you the front hitch on two-wheeled vehicles to provide the leveling. The RV has a system installed to do this for you.
Chocks and blocks need to be used to prevent the vehicle from rolling. The chocks should be put in place and hammered in with a rubber mallet. One in front and behind a wheel should do the job. This keeps it from shifting as it is being raised. The stands need to be placed on blocks of wood. This will prevent them from sinking into the dirt at the campsite. Sinking will cause it to become unstable again, so be sure to have sturdy, thick blocks to place the stands on because they will be holding a lot of weight.
Install or lower the jacks. If they are removable, pull them out of storage and set one on each block of wood. Raise them, or lower them if they are attached to the RV until the vehicle is held in place. They should be nice and tight and pushing up pretty hard in order to keep things from moving around when you're inside the vehicle.
Reverse the process when you are breaking camp. You can damage the vehicle if you try to leave before removing or raising these. The trailer's front can't be lowered onto the tow hitch if these are in place. The blocks of wood need to be collected and store along with the wheel chocks. Before removing either of these, be sure the emergency brake is on so it will not move when you remove the chocks.
Safe camping includes using chocks, blocks and jack stands. They will keep the vehicle from moving and provide a stable environment for moving around. Since they are not built on a foundation like a house, this provides that foundation. They should be placed at all four corners in order to have the best effect.
About the Author:
You can get a summary of the things to keep in mind when buying travel trailer stabilizer jacks at http://www.trailerlegs.com/about right now.
ليست هناك تعليقات:
إرسال تعليق